2K Carbo Filler Transparent 1,0

2K Polyurethane Filler

Technical Data Sheet

Article numbers and download table

Art.No. Specification KP VE Safety Data Sheet
157.988 A - Comp. / transparent / 1,0 L 12 12
157.989 B - Comp. / 0,7 L 12 12

DESCRIPTION

  • 2K Polyurethane filler
  • High transparent carbon filler
  • VOC compliant

Drying time:

  • Drying time:
  • 60 min. / 60°C
  • 30 min. / 80°C

AREA OF APPLICATION

  • All common filler work on carbon parts

BENEFIT

  • High filling power
  • Very good sandability
  • Low marking of the matrix
  • UV resistant

APPLICATION ADVICE

Note: The maximum total film thickness should not exceed 180 μm, corresponding to a maximum of three coats of approximately 60 μm each when using a 1.6 mm nozzle size. If the total film thickness exceeds 180 μm, the filler may take on a milky or cloudy appearance during application or drying. This optical effect is temporary and will disappear after complete drying and subsequent sanding.To ensure optimal coating results, it is strongly recommended to strictly follow the application instructions and specified film thickness guidelines.